AZFX4

Just email that guy I posted the link to. See about a 1.5" spacer with the 7 lug pattern to 6x135 pattern. Or talk to Nitewolf and ask him about where he got his spacers from. The guy that did his custom makes them and are good. But they were quite a bit more than the 1s I got off ebay. And so far, so good. They held up against my offroading adventures.

And anything less than 1.5" you need to cut the studs, so that's where I would stop at.

01f1fiddy

Whoa not so technical bro..I may need to explain this to my kids

01f1fiddy

The ebay guy wasnt interested after 2 emails same answer "we dont carry those"

Ill look up Nitewolf thnx man.

01f1fiddy

Ok i found a better price and in my mind better builder. Here is his reply:

Thanks for sending me an email... I can build what you are looking for no problem at all.. Infact, I took an order yesterday for a guy who is making his F250 into a 6x135. We have converted 100's of 7x150 trucks into 6 or 8 lugs over the pass 10 years.

We invented the two piece adapter... You get a lifetime warranty and all of our products carry a 1 million dollar insurance policy.

These will be built hub and wheel centric to insure no vibration problems and all of our products are made right here in our shop on American Made Haas Machines out of Real American Alcoa.

The cost is $575 shipped to your door.

Let me know... Thanks JR

Lenny Stahl, JR
Owner
Motorsport Tech
10 Greg St. Suite 112
Reno, NV 89431
Office 775 351 1000
Cell 909 844 0942
www.motorsport-tech.com


So now the question is go to 6 or 8 lug and why.
I will ask Jr what he says also.