My code for fuel level sensor high current PO460 that gave me crank no start ended up being gauge cluster processor failing. All gauges worked except for the fact that I had dash’s on my odometer and the tach even though it would sweep would not show rpm while cranking. I reflowed all the connections to odometer and wiring plugs but no change. I had replaced the fuel pump the pcm and fuel pump relay and replaced pcm. Had 2 locksmiths come out to recode and couldn’t do it. I got a cluster from the wrecker and installed and instead of dash’s I had no odometer readout. Reflowed those connection that were cracked and reinstalled and got a mileage readout. Mechanic neighbor came over with snap diagnostics tool and with original pcm put back in was able to get the new cluster to marry in and keys coded. Issue resolved and no check engine light. Hope this helps anybody in the future.

 

That's awesome.

 

This was on my 00 5.4