Installing The Body Lift
#11
Senior Member
iTrader: (1)
If you dont have rust to deal with and you have a good breaker bar then im thinking you wont let it get the best of you.
#12
Senior Member
when I did mine I took all can mounts out, jacked front of can up, put the pucks in with bolts the jacked up rear of the cab,I did however snap the 2 bolts (5/8) head I think in the front but if you do, just jack up the front of the cab and there is still another place to put a socket or wrench to remove it! Goodluck
#14
Senior Member
Thread Starter
Oddly, I was listening to country music yesterday.
#15
Senior Member
Thread Starter
The box is open..
#16
Senior Member
iTrader: (1)
#17
Installing The Body Lift
Originally Posted by Wolvee
The box is open..
The following users liked this post:
harley9703 (09-20-2015)
#18
Senior Member
Thread Starter
The good news is I'll be able to paint my frame a bit while I'm working on it.
#19
Installing The Body Lift
Originally Posted by Wolvee
The good news is I'll be able to paint my frame a bit while I'm working on it.
#20
Senior Member
Thread Starter
I don't know yet. I've still got a few quarts of POR and prep from my car but I'm not sure what paint I'll use over it. I might be lazy and use a BBQ paint or Hi-temp engine enamel.