Hey guys so i already have the aftermarket torsion bar key to level the front but i wanna put 3" blocks in the back. I plan to crank the t bars up a little too. But i still want the front just about level. So i was wondering if there is a part for the front suspension (like bigger control arms or something) i could buy that would get maybe an inch in the front, without messing the CV anles up or anything else. Because i dont feel paying a @$$ load for a whole suspensiogn lift. If you had any advice i would appreciate it.

 

Anything more then aftermarket t bar keys then your going to start having cv shaft issues.

 

You should just crank you stock keys. The aftermarket keys only allow for more cranking of the torsion bars. Therefore putting more preload on the front. I just cranked my stock keys and a add a leaf. I would suggest you return the aftermarket keys and save the money. Good luck though