jferg92

Dang, nm. Read farther and they're sold

ibd2328

iTrader: (2)

Go with some JE's
Unless you are going over 500hp the 400 buck Manley's will be fine..

jferg92

I'll look into those. On the header subject, stage 8 locking studs and what gaskets?

ibd2328

iTrader: (2)

I have a set of Fel pro I'm not using. I just don't like the two piece design

jferg92

I've the got the two piece oem motorcraft for the drivers side but unsure of fitment of them with headers. I want a leak free guarantee lol

jferg92

Btw truck is back to dd status. Second time around intake leak fixed, replaced the thermostat gasket, one vac line, and botched the other two leaks. Towed the boat to the river just fine tonight

4x4dave

Nice hopefully it runs real nice now. Makes it worth all the frustration

jferg92

Thanks Dave
And you'll know as good as anyone. I thought 99-00 m112's had the just "eaton" on the snout and the 01-04's had "ford Svt" as well. The seller was sure he pulled mine off of an 01 but mine just says eaton

fordmotorsport

Take a pic of the underside bolt pattern. If the bolt holes are parallel then you have the 01-04. If not then you have the "prone to leak" 9 row cooler too. If the bolt holes are offset, then it is the 99-00.

jferg92

Thanks. I've yet to take anything apart because ups STILL hasn't got back to me