Cruise dilema
#1
Cruise dilema
2003 Super Cab with big V-8. Cruise control won't set...turn it on, push the "Set/Accel" button, dash light says "Cruise" but it won't set. Step on the brake and the dash light goes out? I've changed the sensor at the master cylinder, brake lights all work. Any ideas??
#3
X2 on linkage to throttle body, chances are the pin the link snaps onto is worn out, drill a tiny hole in the link snap it on and drop a caughter pin in the link to stop it from popping off but still allowing it to flex like it's designed too.
#5
Right on! Not clear on the direction of the drill hole, however. Vertically down through, or horizontal through the end? YOU ROCK!
#6
Originally Posted by Tailgater1
Right on! Not clear on the direction of the drill hole, however. Vertically down through, or horizontal through the end? YOU ROCK!
#7
Mark
iTrader: (1)
Trending Topics
#8
Thanks a million.
#9
Originally Posted by Tailgater1
Have it secured with a rubber band to check. You are right! Works fine. Is that pin replaceable? It is worn very badly and the linkage simply falls off.
Thanks a million.
Thanks a million.
#10
I sure appreciate your time and advice. May look at drilling it out and tap it with a modified bolt with the head machined to fit the cable connector. I'll see how yours is set up first. Your ingenuity is awesome.