kyle7

So i want to get some 35/12.5 Nitto MG's on 20" KMC badlands rims and was wondering if this would fit on just a 3" body lift. i will eventually get a 4.5" lift with a 3" body lift but dont have the money for it all right now. and i'm thinkin thhat a susp lift with stock tires wont look good at all so what should i do? thanks.

kyle7

Anyone?

dplummer87

Cant tell you about the fit or look, but if your doing off roading, I would go with a suspension lift before doing a body lift...Just my opinon...Im sure someone will be around to answer your question though...Ive noticed its been a slow day around here.

cole_ford

You can fit 35s with a 3 in body lift. I have 285s right now with a 3 inch body lift. If I had gap guards in the front, I think it would be tough to tell that i had a body lift.

skip3920

You can fit the 35's but you need to watch your backspacing. I'm running a 305/70/17 wich is the same as your 35/12.5 I'm running a 17x10 wheel with four inch back spacing and I only have about an inch between the sidwall and the leafs in the rear. If i'm turning and the suspension flexs' i will get a very slight rub in the front. Hope this helps.

crazycanuck

i thought a 305 was a 33" tire and a 315 was a 35", or am i mistaken?

skip3920

My 305's are only 1/2 -1 inch smaller than the 36's on my other truck.

skip3920

The 305/65/17 pro-comps I took off Only measured 33" The 305 is the width of the tire, and the middle number is you sidewall highth. 70's being taller than 65

kyle7

so this morning on the way to classes i saw a single cab f150 97-03 body style with what looked like a body lift and it was ugly. the exhaust hung way to low, there was weird gaps everywhere, and... and well it was just ugly so i've decided to not get a BL. thank for all the help tho.

98triton

I'm runnin BFG A/T's they are 285's. I dont have a lift at all, so Im positive your tires will fit with your lift.