canaknight

2000 f150 extended cab wanting to swap bench with a 40 60 juss wanting to know if this bolts right up or what

Bell Blue Raider

Direct bolt up, the extra bolt wholes you need are under the carpet already

me1234

Do it the 40/60 split bench is awsome. You'll love having a center console and armrest

canaknight

yeah im going to go to pull apart and get one for 60 bucks i dont care if it dont match that what seat covers are for

Bell Blue Raider

You can leave the carpet in, just set the seats in there and cut the carpet where the bolts go. And be sure to grab all of the bolts for the new seats

paulythepirate

Is tapping required?

rambinca

I need to do this also. I miss having an armrest.

TheBathTub

Expedition buckets with power driver seat and huge center console? direct bolt in with some tapping check my signature below, much better in my opinion

Spannerhead

I have a power drivers seat and the 40/60 split bench. Dunno if that was a common option. Would rather have that than individual buckets; the middle seat is nice to have in a pinch and allows Mrs Spannerhead to scoot over on hot dates.

akdoggie

I added the power seat to the drivers seat. It came with the 40/60 seat, but manual adjuster. After switching the base from the Expy seat, it was a simple adding of two wires to cover the power seat motor load. I used an always hot terminal in the dash fuse box. I added a relay between the two and everything works as it should. It makes a bad back feel much better when I get back from a road trip. I was going to install the two buckets with the center console, but decided to just use the power base. I ended getting back all the money I had invested and still ended up with the power option. It was a great move in my opinion.