97-03 LED full guide!!
03-15-2014, 10:36 PM
#511
Resident Worm Drowner
03-15-2014, 10:48 PM
#512
Resident light whore
Thread Starter
The following users liked this post:
Ringleader (03-17-2014)
03-15-2014, 11:02 PM
#513
Resident Worm Drowner
03-17-2014, 06:14 PM
#515
Resident Worm Drowner
One more question...
Since I want the new fogs on at the same time as the factory fogs, I would run hot from battery to relay, ground to relay, relay to fogs, and instead of adding a switch, I would run a splice from the factory fogs hot wire to the relay, correct?
Then when I pull out the factory fogs switch, the splice from factory wire tells the relay to start drawing power from the battery to run the new fogs?
I left fuses out, bcs I figured that would be a given.
Since I want the new fogs on at the same time as the factory fogs, I would run hot from battery to relay, ground to relay, relay to fogs, and instead of adding a switch, I would run a splice from the factory fogs hot wire to the relay, correct?
Then when I pull out the factory fogs switch, the splice from factory wire tells the relay to start drawing power from the battery to run the new fogs?
I left fuses out, bcs I figured that would be a given.
03-17-2014, 06:16 PM
#516
Resident light whore
Thread Starter
One more question...
Since I want the new fogs on at the same time as the factory fogs, I would run hot from battery to relay, ground to relay, relay to fogs, and instead of adding a switch, I would run a splice from the factory fogs hot wire to the relay, correct?
Then when I pull out the factory fogs switch, the splice from factory wire tells the relay to start drawing power from the battery to run the new fogs?
I left fuses out, bcs I figured that would be a given.
The following users liked this post:
Ringleader (03-17-2014)
03-19-2014, 05:09 PM
#517
Junior Member
Join Date: Jan 2012
Location: Greenville, North Carolina
Posts: 25
Likes: 0
Received 1 Like
on
1 Post
Im thinking about ordering some back up LEDs but before I do just wanted to hear some opinions on if its worth it. Do they make much of a difference? Also how many SMD would be best. Found some on Amazon that are 54 SMD would that make a noticeable difference?
03-19-2014, 05:16 PM
#518
Resident light whore
Thread Starter
A bit more expensive, but the Output is clearly worth it as you can tell
03-19-2014, 05:31 PM
#520
Resident light whore
Thread Starter
