97-03 LED full guide!!
#401
Resident light whore
Thread Starter
Huh... Good thing I didn't do that. I'm going to give these a shot. If these things are super bright, I'm going to consider swapping all the exterior LEDs to this style.
Video Link: http://www.ebay.com/itm/2-x-11W-White-3156-3157-CREE-COB-Reverse-Backup-DRL-Lights-Projector-LED-Bulbs-/321284392566?pt=Motors_Car_Truck_Parts_Accessories &hash=item4ace0ac676&vxp=mtr
Video Link: http://www.ebay.com/itm/2-x-11W-White-3156-3157-CREE-COB-Reverse-Backup-DRL-Lights-Projector-LED-Bulbs-/321284392566?pt=Motors_Car_Truck_Parts_Accessories &hash=item4ace0ac676&vxp=mtr
#402
Resident light whore
Thread Starter
Installed my Cree LED projector reverse light bulbs. No more incandescent white bulbs, they seem to be crazy bright, and they're most definitely the highest quality LED bulbs I've messed with, the whole housing is metal. Cree is definitely the way to go if you're looking to swap. Attachment 288451 Attachment 288452 Attachment 288453
Link http://m.ebay.com/itm/321233254560?nav=SEARCH&sbk=1
Link http://m.ebay.com/itm/321233254560?nav=SEARCH&sbk=1
#404
Resident light whore
Thread Starter
#405
RDNK150
These are the actual CREE bulbs. The ones I posted are knockoffs Video Link: http://m.ebay.com/itm/251343768794?nav=SEARCH&sbk=1
Edit:
I'd also like to do the brake lights/directionals but I've heard led bulbs will just cause the truck to look like a bad bulb and blink a million times a second. I remember you putting something up about a separate relay or something to that effect I'd need to buy to make the directionals work with LEDs
Last edited by 2003XLT; 02-01-2014 at 07:44 AM.
#406
Resident light whore
Thread Starter
The first post you made was for the stock reverse lights correct? It says like 8 different bulbs do I need to leave a note to the seller which one I need or because this is an aftermarket bulb are those the specific bulbs you can substitute them for? I've been silently following the Cree bulbs thread and need a little more light when I back up
Edit:
I'd also like to do the brake lights/directionals but I've heard led bulbs will just cause the truck to look like a bad bulb and blink a million times a second. I remember you putting something up about a separate relay or something to that effect I'd need to buy to make the directionals work with LEDs
Edit:
I'd also like to do the brake lights/directionals but I've heard led bulbs will just cause the truck to look like a bad bulb and blink a million times a second. I remember you putting something up about a separate relay or something to that effect I'd need to buy to make the directionals work with LEDs
If you're wanting to do your signals you'll need to swap out your flasher relay for an LED flasher with no minimum draw.
#407
RDNK150
Those bulbs are a direct replacement bulb for a stock F-150/Superduty till 08. I actually bought 4 and did day's F-250 to be sure they'd work on a stock F-150 If you're wanting to do your signals you'll need to swap out your flasher relay for an LED flasher with no minimum draw.
#408
Resident light whore
Thread Starter
#409
Senior Member
Installed my Cree LED projector reverse light bulbs. No more incandescent white bulbs, they seem to be crazy bright, and they're most definitely the highest quality LED bulbs I've messed with, the whole housing is metal. Cree is definitely the way to go if you're looking to swap. Attachment 288451 Attachment 288452 Attachment 288453
Link http://m.ebay.com/itm/321233254560?nav=SEARCH&sbk=1
Link http://m.ebay.com/itm/321233254560?nav=SEARCH&sbk=1
These are the actual CREE bulbs. The ones I posted are knockoffs
http://m.ebay.com/itm/251343768794?nav=SEARCH&sbk=1
http://m.ebay.com/itm/251343768794?nav=SEARCH&sbk=1
so I'm confused.. which ones are the ones you got? the first or the second?
#410
Resident light whore
Thread Starter