Red Thunder

ok so i know there is the HID sticky but i couldn't find my answer to my question in it so here it goes on our 97-03 trucks (i have a 00) with these ddm tuning hid kits do we need the hid harness, the error code eliminator or the adapters???

aloha_hawaii

go buy the kit from jon_to u just need the harness bulbs and ballast and nessesary wiring i got low and hi beam xenon its super bright i ALWAYS get hi beamed flash.

https://www.f150forum.com/f37/extend...shipped-76843/

Red Thunder

i already orderd the kit from ddm and im just wondering if i will be needing the harness or adapters or anything besides what comes in the kit?

Josh662234

adjust your headlights, don't be that guy. That's why these kits are going to b illegal.

OP: DDM sends you everything you need. I just got my headlights and fog lights. They now come in a box straight from china, due to legalities.

aloha_hawaii

they are already illegal. and get people who dont adjust with a lift so i dnt care they can do it i will too

Tldx07

Ok then; I have always ordered from DDM A+ in my book but all you need is to order the HIDs and that includes everything you will need. Lights, ballasts, and a controller if you ordered hi/lo bulbs; all plug and play

Red Thunder

thanks guys for all the help ha. where did you guys end up mounting the ballast if i might ask??

Tldx07

I mounted mine basically right above the headlight on each side, picture would be better but then I drilled like two holes in each and just used drywall screws to hold it :/ kinda ghetto but it won't budge and never had a problem. The hi/lo controller I mounted on the passenger side behind the headlight

Red Thunder

thanks man if you could pictures would help hahaha

Tldx07

Ok here yah go; first two are left and right ballast, one for each headlight. The last one is the controller which I mounted behind the headlight assembly on the passenger side