1997 Ford F-150 XLT 4.6L, 4x4, automatic I need help please
09-19-2018, 11:13 AM
#11
09-19-2018, 11:24 AM
#12
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
When they key is in the on position only the oil temp light and the battery lights..
any clue as to where the solenoid is that maybe the culprit.
heres a picture of the cracked part of the positive ground I was mentioning.
Last edited by J3d1d14h; 09-19-2018 at 11:30 AM.
09-19-2018, 11:38 AM
#14
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
09-19-2018, 12:02 PM
#15
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
09-19-2018, 12:30 PM
#16
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
SO far I have narrowed my problems to
So I was looking on YouTube for people with similar problems and experiences and I found this video and this guy’s truck sounds just like my truck when I tried to start it and I tried the screwdriver trick and proved my electrical has power in and out of the solenoid so I’m going to get a test light and buy a starter and a replacement solenoid and then take whatever back to the store once I figure out what I don’t really need
Thank you so much to all of you for all your support and experiences and opinions and suggestions I couldn’t of gotten this far without you all
Thank you so much to all of you for all your support and experiences and opinions and suggestions I couldn’t of gotten this far without you all
09-19-2018, 12:48 PM
#17
So I was looking on YouTube for people with similar problems and experiences and I found this video and this guy’s truck sounds just like my truck when I tried to start it and I tried the screwdriver trick and proved my electrical has power in and out of the solenoid so I’m going to get a test light and buy a starter and a replacement solenoid and then take whatever back to the store once I figure out what I don’t really need
Thank you so much to all of you for all your support and experiences and opinions and suggestions I couldn’t of gotten this far without you all
Thank you so much to all of you for all your support and experiences and opinions and suggestions I couldn’t of gotten this far without you all
09-19-2018, 02:13 PM
#18
Senior Member
iTrader: (1)
When you jumped the posts with a screwdriver did it turn over?
09-19-2018, 05:36 PM
#19
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Again still the same chuck sound one time when I try to start
the starters been replace properly, the battery and cables are all new and in old condition I tested with a test light,
but still my truck won’t roar to life yet, any feedback or ideas community??
sincerely
Jedi
but still my truck won’t roar to life yet, any feedback or ideas community??
sincerely
Jedi
09-19-2018, 05:38 PM
#20
Junior Member
Thread Starter
Join Date: Sep 2018
Location: Eugene Oregon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts