BMForrest1515

I have an 01 F150 2X4 with a 1.5 inch coil spacer in the front. I'm looking to put a suspension lift to add some height to it. I'm tight on money but have a friend who's pretty mechanic handy and we were talking about buying a taller coil for the front and putting a block in the back between the axle and leaf springs. My question is: about how high could I go before I have to start replacing other parts such as brake lines, steering column, or possibly any other hoses or gizmo's? I also know an after market camber kit is needed to help align the tires. I put a camber kit that allows between -2 and 2 degrees, how much of a lift would this allow?

Thanks

deanofay

Rough country 3in lift spindles, 3in block in rear and 2.5in coil spacer upfront. 5.5inches of lift for under $500

BMForrest1515

I have a cheap way of getting the parts, i'm just wondering how high i can go before i have to start replacing parts other than shocks, coil, camber kit, and small hardware used to mount them.

deanofay

I would go higher then what I said. You gonna need new shocks and an eccentric kit

BMForrest1515

what is an eccentric kit? sorry, just learning how to do most of this stuff.

Old Red SCrew

Its the cam bolts used for alignments