Lethal Weapon

Thanks & they do look great!!!
I can say that the LED's are more of a blue and don't match perfectly. But they still look great!!!
Got my own OCD & it looks good enough that I don't even think about it.

KustomFX

iTrader: (3)

GOD BLESS AMERICA!!!!!

4th of July sale!!!!!

"Cubby hole" 3 switch panels on sale!!!

Price: $15.00 !!!!!

Now on sale until midnight of the 4th!!!!

Don't forget I now sell OTRATTW/Carling genuine switches. They are SPST (on/off) switches and 4 different led choices.
-also a 15 conductor (with color coded wires) cable to power your switches is also available.

Any questions, please feel free to email me at: lethalweapon09@yahoo.com


Thanks,
Brett
.

KustomFX

iTrader: (3)

Happy 4th of July!!!!!!!

Thank you all for your recent orders & please post up your pics when you get them all done & installed.

This sale ends tonight at midnight tonight....
Again thank you!!
.

steve392

Got my switch panel, wiring and dash trim piece today. Can't wait to install it this weekend.

KustomFX

iTrader: (3)

Awesome. Post the pics when it's all installed!

jealsta

Which adhesive worked the best for this mod

KustomFX

iTrader: (3)

Thank you for asking... I think I did forget to post my results.
They ALL did great!!!!
But here's in order of the best results in my opinion:

1) JB Kwiqweld .... Easy to find, inexpensive, not too runny & dries fast!!

2) SUGRU "moldable glue" .... Harder to find & a little more expensive. But actually easiest to work with. No mixing. Simply tear open the packets & mild it around the perimeter.

3) Permatex 5 minute epoxy..... Inexpensive, but it was a little more runny than JB Kwiqweld. It dries quick also, but I still favor JB kwikweld over the Permatex.

Hope it helps & all 3 hold fantastic & they will not come off without possible cracking the dash panel!

Thanks for reminding me to post the epoxy results!

Brett

steve392

Got my switch/oem panel set up from installed. Ran into an issue with the wiring. A few emails back and forth and now im understanding it. I'll have my lights wired up hopefully tuesday or wednesday. Was very easy to pull out original panel piece, swap over the vent and 4wd switch. The factory cubby is held in by 2 screws, removed those and popped out the cubby and put in the new stuff. I also cleaned what im assuming is the interior temp sensor behind those cutouts. Mine was caked in dust and crap.

KustomFX

iTrader: (3)

Looks good!!! Glad you got my other emails.
I left my phone# in one of the emails so if you have any questions, shoot me a text & I can help you quickly.
Again, looks good!
-Brett

Dodgy

Saving this for later.