When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was going to do non nav to oem nav swap on my f150, but my plans changed. I have the following parts:
- 2 screens 1 screen
- 2 nav receiver units 1 nav receiver unit
- 2 nav bezels 1 navigation bezel (black)
- 1 dash control unit
- 1 plastic replacement dash piece for the upper lcd screen
- all the connectors cut from donor Truck to be wired in
Sold!
Last edited by Jordan Kocher; 10-10-2018 at 09:01 AM.
Reason: Sold all items
You don't need both systems to make it work. However, I only have one set of all the cables. I did not want to separate mainly due to the hassle of trying to find two people to buy it all. But depending on what you both are looking for, I may be willing to separate if I am able to get rid of it all between you two.
I am interested in the black on as well. But the wood one can be wrapped no problem. I have the appearance package anyway so I could do a wrap to match my trim. I dont have the time to go get plugs cut from a doner like you have so I would need all related plugs and harnesses you have, one radio and Id take the wood trim.
Question... Did you see if all pieces worked prior to getting them?
Last edited by ProAktion; 05-16-2018 at 05:48 PM.
Reason: more info added
If you are doing the conversion you will also need that dash control module (different than the climate control module that is in the bezel) and you will also need that plastic piece that replaces the upper LCD screen. I would do $600 for the woodgrain bezel with climate control, dash control module, upper lcd plastic replacement, harnesses, screen, and receiver unit.
04-23-2018, 10:03 PM
F150 oem navigation/possible non nav swap
