When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got my custom switch in the mail today. Looks fantastic!
Build quality is awesome. Very neatly wired. Was packaged very well also. Very pleased with my purchase. I'll post some pics of my trucks setup once I get it all done
Thank you!!!
Yes, feel free to post your pics when you get it installed!
You'll love it!!!
Thanks,
Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
I finally got around to installing my panel. I haven't wired it up yet, but at least the hard part is over. It's a PITA to cut the plastic support behind the headliner with a moonroof - that and it's damned HOT!
Thanks to Brett for providing an awesome product and excellent service/support!!!
I finally got around to installing my panel. I haven't wired it up yet, but at least the hard part is over. It's a PITA to cut the plastic support behind the headliner with a moonroof - that and it's damned HOT!
Thanks to Brett for providing an awesome product and excellent service/support!!!
Looks good, what's with the front hub disconnect? You have override on the vacuum so you can run rear wheels in low range?
I finally got around to installing my panel. I haven't wired it up yet, but at least the hard part is over. It's a PITA to cut the plastic support behind the headliner with a moonroof - that and it's damned HOT!
Thanks to Brett for providing an awesome product and excellent service/support!!!
Thank you and that looks great!!!!
Yes, the Moonroof equipped trucks have a plastic "support" that requires trimming for the switch panel & the depth of the switches.
I used a rotary "burr bit" when I did mine that worked great & really quick.
(Non Moonroof trucks do NOT have that support and it's completely wide open).
Again, thank you and it looks great!!!!
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
Yes, the Moonroof equipped trucks have a plastic "support" that requires trimming for the switch panel & the depth of the switches.
I used a rotary "burr bit" when I did mine that worked great & really quick.
(Non Moonroof trucks do NOT have that support and it's completely wide open).
Again, thank you and it looks great!!!!
-Brett
Yes, I used my Dremel with a cutting bit and it worked really well. My issue was thinking that I didn't need to cut as much as it actually required. You basically have to cut out as much as the opening will allow. Also, as I mentioned above, it is extremely hot a humid here in GA, so I was sweating like a pig in a bacon factory. Also, the cab looked like it snowed from all of the plastic shavings...
Yes, I used my Dremel with a cutting bit and it worked really well. My issue was thinking that I didn't need to cut as much as it actually required. You basically have to cut out as much as the opening will allow. Also, as I mentioned above, it is extremely hot a humid here in GA, so I was sweating like a pig in a bacon factory. Also, the cab looked like it snowed from all of the plastic shavings...
It's all good - mission accomplished.
Absolutely!!! And fantastic results!!
Love the set up including the hub disconnect!!
Thanks brother & enjoy!!!
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
Again, I would like to thank all of those for the recent orders and continued support.
The OTRATTW/Carling Technologies Switches, by far, are the most popular and the best seller......but I am now offering round switches for anyone wanting a different look and an option.
I will now start stocking 3/4” (19mm) round switches for another choice in switches. They are the “Plasma LED” switches that will be available in a Stainless Steel polished bezel with LED color choices: Blue, Red, Green, White & Purple colors. (Momentary also available in Blue & Red)
Also available are Black Bezel Switches too. Those are available in 3 LED colors: Blue, Red & White “Plasma LED’s”. (Momentary also available in Blue & Red LEDs).
06-27-2017, 09:33 PM
