Topic Sponsor

Toronto Maple Leaf Centennial Edition Graphic

Thread Tools
 
Search this Thread
 
Old 02-10-2019, 05:56 PM
  #1  
Member
Thread Starter
 
kroache's Avatar
 
Join Date: Dec 2010
Location: Caledon, Ontario, Canada
Posts: 33
Received 1 Like on 1 Post

Default Toronto Maple Leaf Centennial Edition Graphic

Any ideas where I might be able to locate the graphic shown below? I actually went to my local Ford dealer and the part's guy checked a V.I.N. # of a 2017 Maple Leaf centennial edition truck they had on the lot. He figured if they sold that edition of the vehicle they would also need to have the decals available as replacement parts but no luck finding the #. There were a limited number of these 2017s available in the Toronto area (I believe 400 trucks were sold). I just had the rear box replaced on my 2016 Platinum (after a minor fender bender) and asked the body shop to leave the 4x4 graphic off the rear quarter panels.
Cheers
Kevin
Old 02-12-2019, 01:17 PM
  #2  
Senior Member
 
imhip2's Avatar
 
Join Date: May 2017
Location: North of Toronto
Posts: 146
Received 46 Likes on 30 Posts
Default

Originally Posted by kroache
Any ideas where I might be able to locate the graphic shown below? I actually went to my local Ford dealer and the part's guy checked a V.I.N. # of a 2017 Maple Leaf centennial edition truck they had on the lot. He figured if they sold that edition of the vehicle they would also need to have the decals available as replacement parts but no luck finding the #. There were a limited number of these 2017s available in the Toronto area (I believe 400 trucks were sold). I just had the rear box replaced on my 2016 Platinum (after a minor fender bender) and asked the body shop to leave the 4x4 graphic off the rear quarter panels.
Cheers
Kevin
Go on Etsy. Only 2 left so can do both sides if you hurry for only Cdn $20.
Leafs Vinyl logo
Not sure why they only made those in XLT. I remember seeing #2 of #400 at McAlpine when they first came out. Took a picture of it but can't find it. Not sure why Summit still has it. Must be waiting to cash in when Leafs win the cup!
The following users liked this post:
kroache (02-13-2019)
Old 02-13-2019, 04:24 PM
  #3  
Senior Member
 
imhip2's Avatar
 
Join Date: May 2017
Location: North of Toronto
Posts: 146
Received 46 Likes on 30 Posts
Default

So because it's convenient I popped into the HHoF Spirit of Hockey store today to see if they had these. They do but in white (I didn't see any blue). They are the official NHL version and approx 5"H * 4"W and to my surprise are $5 each
The following users liked this post:
kroache (02-13-2019)
Old 02-13-2019, 06:04 PM
  #4  
Member
Thread Starter
 
kroache's Avatar
 
Join Date: Dec 2010
Location: Caledon, Ontario, Canada
Posts: 33
Received 1 Like on 1 Post

Default

Originally Posted by imhip2
So because it's convenient I popped into the HHoF Spirit of Hockey store today to see if they had these. They do but in white (I didn't see any blue). They are the official NHL version and approx 5"H * 4"W and to my surprise are $5 each
Very much appreciate the link and checking out the store. Lot's of neat items on there for sure. I was specifically looking for the same decal style shown in the picture though (i.e the Leaf logo but also the blue stripe that extends down the length of the rear quarter panel). One of my neighbours has the special edition truck and I think the rear decal looks pretty good on there. They did a nice job on that truck but as you mentioned, too bad it was only available in the XLT trim.
Thanks again for getting back!!
Cheers
Kevin
Old 02-13-2019, 11:23 PM
  #5  
Member
 
jay2703's Avatar
 
Join Date: Oct 2017
Location: Eastern Washington
Posts: 30
Received 13 Likes on 9 Posts
Default

Here is the graphic file. If you know someone with a vinyl cutter, you can have them make it.

https://www.brandsoftheworld.com/log...-maple-leafs-1
The following users liked this post:
kroache (02-14-2019)
Old 02-13-2019, 11:48 PM
  #6  
Member
 
jay2703's Avatar
 
Join Date: Oct 2017
Location: Eastern Washington
Posts: 30
Received 13 Likes on 9 Posts
Default

I threw this together.
The following 2 users liked this post by jay2703:
imhip2 (02-16-2019), kroache (02-14-2019)
Old 02-14-2019, 08:20 PM
  #7  
Member
Thread Starter
 
kroache's Avatar
 
Join Date: Dec 2010
Location: Caledon, Ontario, Canada
Posts: 33
Received 1 Like on 1 Post

Default

Originally Posted by jay2703
I threw this together.
Well done!! I do know someone with a vinyl cutter so that is an interesting option I hadn't considered. Definitely will check with him to see if this is something he could put together.
Cheers
Kevin
Old 02-14-2019, 08:35 PM
  #8  
Member
 
jay2703's Avatar
 
Join Date: Oct 2017
Location: Eastern Washington
Posts: 30
Received 13 Likes on 9 Posts
Default

Originally Posted by kroache
Well done!! I do know someone with a vinyl cutter so that is an interesting option I hadn't considered. Definitely will check with him to see if this is something he could put together.
Cheers
Kevin
I'll send you the file if you'd like
Old 02-15-2019, 02:20 PM
  #9  
Member
 
jay2703's Avatar
 
Join Date: Oct 2017
Location: Eastern Washington
Posts: 30
Received 13 Likes on 9 Posts
Default

Here is an EPS file your friend with the cutter should be able to open.
Attached Files
File Type: zip
Toronto.zip (7.2 KB, 43 views)
The following users liked this post:
kroache (02-15-2019)
Old 02-15-2019, 10:49 PM
  #10  
Member
Thread Starter
 
kroache's Avatar
 
Join Date: Dec 2010
Location: Caledon, Ontario, Canada
Posts: 33
Received 1 Like on 1 Post

Default

Originally Posted by jay2703
Here is an EPS file your friend with the cutter should be able to open.
Thankyou!! Very nice gesture there and much appreciated . If he can put it together for me I will definitely update everyone and send along a pic.
Cheers!!
Kevin


Quick Reply: Toronto Maple Leaf Centennial Edition Graphic



All times are GMT -4. The time now is 02:38 PM.