Inkdot22

I'm so close to getting my STOCK Park Assist Upgrade done on my 05. Bumper drilled with sensor's installed, PAM unit installed and wired, OEM bezel with switch installed... I have one problem thought.... when I go to hook up my sensor harness in the back, there's already a harness for my stock 7 pin connected. Is there something I'm missing? If anyone has an actual picture of the rear wiring of their factory equipped truck (just above the trailer hitch, behind the bumper), it would very much appreciated.

MGD

Hi.

Looks like 2 separate harnesses to me:

Connector C410 for the Park Aid sensors:




Connector C411 for the 7-pin:



(sorry about the blurry diagrams, lol)

I'd take a pic but I'm not lying in 3 feet of snow to do that at the moment

good luck

MGD

Inkdot22

Thanks... upon inspection of a used truck at a local dealership tonight, I found what I needed. I just need a jumper cable that plugs into the connector mounted on the frame beneath the drivers door. I'll include some pics incase someone else was wondering where the park assist sensor jumper harness plugs into...

MGD

Hi.

Well done!

And Thank-you fer not making me crawl under there


MGD

Inkdot22

No worries... I figured I should be the one getting dirty for this...

Best part of the night was the Ford salesman coming up to me and asking me if I needed any help while I was lying on my back underneath a truck on his lot...