bassmaster96

I recently bought tow mirrors with power everything and turn signal and puddle lights. I put them on yesterday and the power part of the adjustment of the mirrors work but no turn signal or puddle lights do. I have read that it is two pins that need to be switched but haven't been able to figure out how with just the search bar. Can anyone help me or send me in the right direction in getting both turn signal and puddle lights working.. Also I have a 06 xlt. Thanks in advanced

kornlizard

http://www.fordf150.net/forums/viewt...p?f=31&t=84568

Try this

2008f1504x4

I had to wire them in on my 08 xlt

bassmaster96

thanks for the link.. is it a hard job to change the pins/wire them

kornlizard

No they are pretty simple

kornlizard

On the truck mirror connector there is a red cap take it off and then use a small diameter safety pin to dislodge the barbed hook on the pin

bassmaster96

Then that's all? Are you talking about the plug that you plug in to get power or are you talking about on the mirror behind that foam piece?

kornlizard

The plug that plugs into the mirror when the mirror is off its the only one left to work with

kornlizard

Btw did you have signals on your original mirrors

bassmaster96

No I just had the power adjustment