wheel and tire ?
#1
wheel and tire ?
In the fitment sticky it says with my level kit it says I should be able to clear a 35 12.50 with my factory wheels. I have a the factory 18s now with 275 70 18 and can barely get my hand between the tire and upper control arm. I would like to run a 35 or 37 (if possible) 12.50 I was looking at a 18x9 wheel with a 25mm offset the whole offset thing still confuses me would those wheels get me away from the control arm to clear a 12.50 thanks for the help.
#2
Senior Member
2 or 4wd?
For something like a 37", you're best off going with a true 4" lift.
For something like a 37", you're best off going with a true 4" lift.
#4
Mark
iTrader: (1)
Gonna need more than a 4" lift to run 37's.. and then you need to turn them too without burning up your tranny. your stock offset is +44 and your new wheels yo want to run are +25.. so you should be fine. may need to trim a tad depending which brand Mud tire you choose. 35/12.50 trail grapplers actually measure 13.4 wide.
#5
Renaissance Honky
Gonna riff off what techrep said: with those 37's, you're squarely into needing differential gearing beyond 4.10's to keep your transmission alive and make your truck feel like something remotely powerful.
The following users liked this post:
techrep (07-18-2017)
#7
Mark
iTrader: (1)
You bet buddy.. Thanks Eric
The following users liked this post:
Jamieat (07-18-2017)