What's the coolest thing you have done to your truck for under $100?
03-08-2016, 10:33 AM
#771
Senior Member
Inductive or qi charging. Place cell phone here it charges. Probably going to cage this one out for one with 3 coils but this is just clean looking and COOL
03-08-2016, 10:39 AM
#772
Senior Member
Lights. On with dome/cargo lights, also magnetic switch in tailgate splices with driver side door. Drop tailgate, bcm thinks driver door open. On then stays on for 30 sec after close. Also dummy proof only on for what 5 10 min if left open?
The following users liked this post:
ScottStevens (05-19-2020)
03-08-2016, 10:41 AM
#773
What kind of bedliner do you have? Did you put it on yourself?
03-08-2016, 12:52 PM
#774
Member
03-09-2016, 09:11 PM
#775
Senior Member
I did, it is a Herculiner. 1 gallon would have been enough except I got impatient with the side walls and they were gobbed on thick, and excess oozed down instead of doing 2 coats. There are some thin spots in the floor of the bed. 1 gallon and 1qt definately enough for 6.5' bed with plenty of coverage. Take your time. Plan on 2 coats for all side walls or it will run down while you THINK it is drying and pool up by the walls.
03-09-2016, 09:13 PM
#776
Senior Member
Like a whopping $5 ebay made in china qi charger took it apart. I am going to get a $10 with a tripple coil to expand coverage area. This works but I should have put it to one side since phone slides around some. Please note, the back of my Head Unit had a USB connection to supply the power to the board. Also add double sided adhesive for the board.
I say I should have put the coil to one side because I typically throw my work's proxy card up there too and that helps it not slide side to side. That's what I'll do when the slightly larger board comes in.
I say I should have put the coil to one side because I typically throw my work's proxy card up there too and that helps it not slide side to side. That's what I'll do when the slightly larger board comes in.
03-10-2016, 07:15 AM
#777
I did, it is a Herculiner. 1 gallon would have been enough except I got impatient with the side walls and they were gobbed on thick, and excess oozed down instead of doing 2 coats. There are some thin spots in the floor of the bed. 1 gallon and 1qt definately enough for 6.5' bed with plenty of coverage. Take your time. Plan on 2 coats for all side walls or it will run down while you THINK it is drying and pool up by the walls.
How rough/smooth is it?
03-10-2016, 01:54 PM
#778
Super Moderator
Like a whopping $5 ebay made in china qi charger took it apart. I am going to get a $10 with a tripple coil to expand coverage area. This works but I should have put it to one side since phone slides around some. Please note, the back of my Head Unit had a USB connection to supply the power to the board. Also add double sided adhesive for the board.
I say I should have put the coil to one side because I typically throw my work's proxy card up there too and that helps it not slide side to side. That's what I'll do when the slightly larger board comes in.
I say I should have put the coil to one side because I typically throw my work's proxy card up there too and that helps it not slide side to side. That's what I'll do when the slightly larger board comes in.
03-10-2016, 01:58 PM
#779
Member
03-10-2016, 02:01 PM
#780