What part is this?
#1
What part is this?
Hey guys,
Been noticing some noise out of my driver's side wheel assembly, and turned the wheel today to check and see what was going on. Needless to say it was readily apparent what seems to be wrong. I have tried looking at diagrams, but can't pin down with 100% certainty what this part is. I believe it is the front stabilizer bar bushings, but I wanted to check with the good people on here before purchasing the wrong part, thanks in advance!
Been noticing some noise out of my driver's side wheel assembly, and turned the wheel today to check and see what was going on. Needless to say it was readily apparent what seems to be wrong. I have tried looking at diagrams, but can't pin down with 100% certainty what this part is. I believe it is the front stabilizer bar bushings, but I wanted to check with the good people on here before purchasing the wrong part, thanks in advance!
The following users liked this post:
UFMatt (07-08-2014)
#6
yep, get you a stabilizer link end...
Moog is a good brand, just remember when you go to replace it you will have to undo the other side to relieve pressure on the actually sway bar, in order to get enough wiggle room to take the link end out and put the new one in....
Also, I'd probably replace both ends, since you gotta almost take the other side completely off to move the sway bar around to get the link end out... and they come in pair when you buy them....
Good luck!
Moog is a good brand, just remember when you go to replace it you will have to undo the other side to relieve pressure on the actually sway bar, in order to get enough wiggle room to take the link end out and put the new one in....
Also, I'd probably replace both ends, since you gotta almost take the other side completely off to move the sway bar around to get the link end out... and they come in pair when you buy them....
Good luck!
The following users liked this post:
UFMatt (07-08-2014)
#7
So, correct me if I'm wrong, but this should take care of it, correct? I understand Moog makes some good stuff, I've always previously used Energy so they're familiar to me: http://www.jegs.com/i/Energy+Suspens...5190G/10002/-1
Trending Topics
#8
yea you can replace just the boot but I think you'd be doing a whole lot of work for nothing....
Those link ends probably need to be replaced all together, esp if you got more than 100k on the truck.... time to replace my friend...
http://www.partsgeek.com/gbproducts/...imcxoCFjvw_wcB
And energy is legit, I've always used MOOG, just a different opinion partner. Good luck to you.
Those link ends probably need to be replaced all together, esp if you got more than 100k on the truck.... time to replace my friend...
http://www.partsgeek.com/gbproducts/...imcxoCFjvw_wcB
And energy is legit, I've always used MOOG, just a different opinion partner. Good luck to you.
The following users liked this post:
UFMatt (07-08-2014)
#9
yea you can replace just the boot but I think you'd be doing a whole lot of work for nothing....
Those link ends probably need to be replaced all together, esp if you got more than 100k on the truck.... time to replace my friend...
http://www.partsgeek.com/gbproducts/...imcxoCFjvw_wcB
And energy is legit, I've always used MOOG, just a different opinion partner. Good luck to you.
Those link ends probably need to be replaced all together, esp if you got more than 100k on the truck.... time to replace my friend...
http://www.partsgeek.com/gbproducts/...imcxoCFjvw_wcB
And energy is legit, I've always used MOOG, just a different opinion partner. Good luck to you.
#10