What did you do to your 11th gen today?
#5021
TOTM November 2019
iTrader: (2)
Getting the color on the cutoff of the passenger side to match up with the color on the driver side. The driver side was nice and blueish/purplish and the passenger was more orange/red and the hot spot was below and to the left of the middle of the cutoff shield. Shimmed the bulb at the 2 o'clock position to fix the hotspot and then put one washer between each of the bottom bolts on the projector to gain back some blue color on the cutoff line. Looks much better than my first aim, but the cutoff is perfectly level and just slightly out of focus way to the right of the passenger side "step" which I figure will be the ditch anyway....
#5026
Member
#5027
TOTM November 2019
iTrader: (2)
I doubt it is the lens. The mini H1's have always been known to not be "perfect" out of the box. Sometimes people get 2 really good ones. I think there are some that you can buy that are "tuned" to be perfect right out of the box. But I did tear mine apart, paint the shields, sanded and lubed the plunger on the solenoid etc, so some of that I may have caused with all the handling.
The following users liked this post:
Summers22 (02-27-2016)