Well ****!!!!!
#1
Senior Member
Thread Starter
Well ****!!!!!
MISS GEORGIA's motor has blown..... the infamous cam phaser issue has done its toll and new motor to be ordered in the morning... I am going with POWERTRAIN PRODUCTS unless someone can advise me otherwise....
#3
Senior Member
Thread Starter
just started having issues 2 days ago. took it into the shop yesterday and repairs were going to run more than 2k. at that point why spend that much and still have 160k on the motor. spent twice as much and will have a motor with 0 miles and the FORD created problems nullified. figured while its in the shop go ahead and lift it too.
#5
05 5.4l 3v s.crew lariat
Big decision
Easy to drop 2 k on this engine if you are hiring it done . Same as saying I'll just have it changed to reman for twice as much .If you do it true, but if hired out a change out will be a lot more .
$3500 reman plus labor and all the gaskets etc. You are looking at $5500 to $6500.
Maybe a smart move depending on what was wrong and your mech abilities.
I must admit I would be looking at same engine but I would be at 280k and doing some of it myself . I would try to get iron tensioners and make sure I had oem phasors with a new melling oil pump . New vcts Oem type, and all new sensors . Probably a new intake manifold and maybe a new intake runner control .
So you see a lot of difference in what you get if you want 200k of future low trouble free maint.
Its like apples and Oranges .
I would really like to see whats wrong with this engine now or is it the typical "you need a new engine" .
$3500 reman plus labor and all the gaskets etc. You are looking at $5500 to $6500.
Maybe a smart move depending on what was wrong and your mech abilities.
I must admit I would be looking at same engine but I would be at 280k and doing some of it myself . I would try to get iron tensioners and make sure I had oem phasors with a new melling oil pump . New vcts Oem type, and all new sensors . Probably a new intake manifold and maybe a new intake runner control .
So you see a lot of difference in what you get if you want 200k of future low trouble free maint.
Its like apples and Oranges .
I would really like to see whats wrong with this engine now or is it the typical "you need a new engine" .
#6
Moderator
2 days of phaser problems and the motor is blown???? I ran mine with the phaser problems for over 7 months with 0 problems and just had my timing done. Change your oil once in a while!!!!
#7
Doubt this was only happening for two days...
The following users liked this post:
BIGDAWG78 (03-03-2017)
Trending Topics
#9
Senior Member
Thread Starter
it was mainly timing related. chain slap. sounded like large rocks being rolled around in a washing machine. we pulled the valve covers and the VCT solenoids we in bad shape, the screen wen broken apart and we could find all the piesces either.... alot of oil varnish in the valve covers too which is odd because I have been running mobil 1 full syn since 58k. my neighbor came to the conclusion the VCT solenoids failed, causing oil circulation issues which then was a downward spiral.
#10
Senior Member
Thread Starter
Thats what i'm doing. the truck cosmetically is in great shape. the transmission was rebuilt 6 months ago. I can put some good money into it with a new motor and now lift it then I'm done. I have the truck I've always loved finished, paid for and here to last me a long time.