Want to paint the side badges
#11
Senior Member
Davickers, what's the best way to paint the ovals? I want the letters red and background black. Ive tried the taping then painting and its never turned out very well. Right now everything is all black.
#12
Originally Posted by davickers
Sorry for the cell phone pics...but here you go. I painted my ovals the same way also.
#13
Sorry man...I may not be the best person to ask about something quite that detailed. It took me 2 weekends to complete everything. First weekend ended up being just the ovals and the second weekend I was able to finish the badges, but a lot more time then I originally planned for. All I did was strip the ovals, sand a bit with 1000 grit (there were a couple small chips), and tried to polish each one before moving on to the paint. None of my letter are painted, I was going too, but ended up in the same boat as you. Nothing seemed to come out as I wanted. I finally had the wife's steady hands help mask off the letters to get as far as I did. Your truck looks great though, the red letting will definitely complement the black!
#14
Thanks Man! As mentioned before, most of the credit goes to the wife! I had some problems as well... Its also a lot easier to take the badges off. lol. I left the tailgate badge on thinking it would be easier and it took as much time to complete as both the fender badges together.
I found that here in WA with 100 degrees that my paint dried way to quick so the paint wanted to come off with the paint. I ended up doing three quick coats within 6-7 minutes and peeling off the tape right away. Then let each sit for a couple hrs to cure. I added three coats of clear coat over the whole badge with 15 or so minutes in between each coat.