Changing spark plugs and before I removed the last one I accidentally spilt coolant down the hole of cylinder 8. Before removing the plug I blew it out with the other cylinders covered and spray wd-40 down the hole and moved ahead. Let it set for about 15-20 minutes then removed the plug. Took it down the road and it’s shaking and sounding like crap. Am I screwed? How do I fix the issue?

 

We have zero idea what your working on...
wd40 is a lubricant not good in the sparkplug well.
Use brake cleaner & compressed air to dry the coil boot & sparkplugwell.

If it as bad as you say it is, misfire code should come up in no time.
figure out wch one you screwed up & fix it.
check your sparkplug gap.....

If it started, its not hydrolocked & chances are you didnt internally hurt the engine.
If there was alot of coolant in there, she would have locked up.

 

Cleaned everything up. Oil looks and smells good. The clip on the ignition coil was broke. Gotta replace it and should be good