Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Truck stalls with edge

Thread Tools
 
Search this Thread
 
Old 10-05-2012, 05:32 PM
  #1  
Senior Member
Thread Starter
 
bassmaster96's Avatar
 
Join Date: Dec 2011
Posts: 138
Received 3 Likes on 3 Posts
Default Truck stalls with edge

I just installed my edge evolution on Wednesday and it has stalled my truck twice once Wednesday when I was in level 3 with not the right octane gas, which was one of the reasons, but today I filled up with 89 octane and was in level 1 and within 200 yds of the gas station it shut off again. It always starts back up on the first try though. Any one know anything? Thanks in advanced
Old 10-05-2012, 05:37 PM
  #2  
Member
 
deliverance's Avatar
 
Join Date: Jan 2012
Posts: 47
Received 2 Likes on 2 Posts
Default

If its idling too low you can turn it up by going to custom tune. Otherwise I know my edge made some other problems I had more evident when I installed mine
Old 10-05-2012, 05:46 PM
  #3  
"Lifted"
iTrader: (2)
 
KingRanch4Life's Avatar
 
Join Date: May 2011
Location: Georgia
Posts: 10,335
Received 223 Likes on 200 Posts

Default

Check your settings and retrace your steps from start to finish... Everything must be set up correct or you'll have issues

Tow(Level 2) 87 requirement but you are capable of running 89 for added performance..
Extreme(Level 3) I've never touched mine but 91+ Octane

Check your settings or go back to stock and start over completely... I know it's a simple process to setup but it's worth double checking...
Old 10-05-2012, 11:08 PM
  #4  
Junior Member
 
bk78's Avatar
 
Join Date: Oct 2012
Location: Edmonton
Posts: 8
Received 0 Likes on 0 Posts
Default

I had the same issue when I installed mine. I have a k/n CAI and duel magnaflow exhaust so I got custom tunes from PHP written and it still did it then I did some trouble shooting and cleaned my throttle body and its been purring like a kitten ever since.
Old 10-05-2012, 11:13 PM
  #5  
Senior Member
Thread Starter
 
bassmaster96's Avatar
 
Join Date: Dec 2011
Posts: 138
Received 3 Likes on 3 Posts
Default

Thanks everyone. I just did a reset on it so we will see how it does. It only shuts off when turning and my rpms drop to about 375 to 400. Sounds a little low to me. What do y'all think?
Old 10-06-2012, 07:29 AM
  #6  
Junior Member
 
bk78's Avatar
 
Join Date: Oct 2012
Location: Edmonton
Posts: 8
Received 0 Likes on 0 Posts
Default

Originally Posted by bassmaster96
Thanks everyone. I just did a reset on it so we will see how it does. It only shuts off when turning and my rpms drop to about 375 to 400. Sounds a little low to me. What do y'all think?
That is the exact same thing as me only when turning my steering wheel. Pop you air intake hose off and buy a can of throttle body cleaner and give it a good cleaning.
Old 10-06-2012, 09:28 AM
  #7  
Senior Member
Thread Starter
 
bassmaster96's Avatar
 
Join Date: Dec 2011
Posts: 138
Received 3 Likes on 3 Posts
Default

Ok I'm going to give that a try today thanks everyone for your help
Old 10-06-2012, 11:12 AM
  #8  
Senior Member
iTrader: (1)
 
Especial86's Avatar
 
Join Date: Dec 2011
Posts: 5,741
Received 532 Likes on 438 Posts

Default

Mopar combustion chamber cleaner down the throttle body will help too.
It does sound like a dirty TB issues.
Old 10-06-2012, 12:04 PM
  #9  
Junior Member
 
bk78's Avatar
 
Join Date: Oct 2012
Location: Edmonton
Posts: 8
Received 0 Likes on 0 Posts
Default

Originally Posted by bassmaster96
Ok I'm going to give that a try today thanks everyone for your help
Let me know how it goes
Old 10-07-2012, 09:25 AM
  #10  
Senior Member
Thread Starter
 
bassmaster96's Avatar
 
Join Date: Dec 2011
Posts: 138
Received 3 Likes on 3 Posts
Default

Has anyone had there edge just loose power and be at stick again. I pulled my boat to the lake last night and ran in level 2 and had no extra power just felt like normal. I'm not having luck with my edge at All


Quick Reply: Truck stalls with edge



All times are GMT -4. The time now is 05:01 PM.