Tire and wheel fitment guide for 04-08
#1871
Ok so I have a 2008 screw 4x4. Want to put a 2 or 2.5 level depending on what I need to get it level....will figure that out. From reading I think I have it correct that I can run 35/12.5/18 on factory rims. If this is correct will I have to trim anything and if so how much? Also I have 3.55 gears, are they gonna be fine to turn 35s without any problems? I don't want to re-gear right now.
Thanks in advance.
Thanks in advance.
#1872
Senior Member
Ok so I have a 2008 screw 4x4. Want to put a 2 or 2.5 level depending on what I need to get it level....will figure that out. From reading I think I have it correct that I can run 35/12.5/18 on factory rims. If this is correct will I have to trim anything and if so how much? Also I have 3.55 gears, are they gonna be fine to turn 35s without any problems? I don't want to re-gear right now.
Thanks in advance.
Thanks in advance.
There are dudes that are running a 18x9 with a 0 offset and didn't have to trim anything. There are also dudes on here that had to trim with a 33" tire. If anything, you'll have to trim some plastic.
#1875
What about the 3.55 gearing. Will there be any problems with it and a 35" tire? Also what size spacers do you think I will need? And how hard on things are the spacers?
Last edited by solareclipsed; 09-12-2016 at 02:32 PM.
#1876
Senior Member
Originally Posted by solareclipsed
What about the 3.55 gearing. Will there be any problems with it and a 35" tire? Also what size spacers do you think I will need? And how hard on things are the spacers?
#1877
Is there a recommended leveling kit for the front? Or are they all about the same?
http://www.ebay.com/itm/2004-2014-Fo...ZU9Eye&vxp=mtr
would something like that be ok?
http://www.ebay.com/itm/2004-2014-Fo...ZU9Eye&vxp=mtr
would something like that be ok?
Last edited by solareclipsed; 09-12-2016 at 07:58 PM.
#1878
Senior Member
Is there a recommended leveling kit for the front? Or are they all about the same? http://www.ebay.com/itm/2004-2014-Fo...ZU9Eye&vxp=mtr would something like that be ok?
#1879
Senior Member
Originally Posted by connorfx4
They're all about the same. There's a ton of people on here who are running the eBay spacers.
#1880
Ok I think I measured wrong and possibly ordered the wrong front spacers. I think I was tired and couldn't add correctly and ordered 2.5" spacers. After rechecking today I think the front is only 1.5" lower. Can I add blocks on top of the factory blocks that are already there, which seem to be 2" blocks, or just take them off and put a 3" block in?