domjaun

Ok so, I am looking at the 01-10 GM 1500/2500/3500HD 3" Rear Drop Part #: 6403 from belltech, for my 07 F150 Screw FX2, it lowers the vehicle 3 inches with out taking the block out from under the leafs. I have 2 inch drop shackles on it and it needs to go lower. I can pull the factory block under the leaf pack and lower it another inch but if the above shackles give me 3 inch drop, I will get a 4 inch drop for a little over $100. The leafs are the same width on the chevys as the fords in that year range, if I remember right anyways, so it should bolt up. I know alot of people say there isn't room for the 3 inch shackle but by my measurements it should clear, it will be close but it appears to have enough clearance. I would have to trim the seem on the under side of the bed but that's ok. Any thoughts on this? Has anyone tried this? If not, I might give it a try. Worst case it doesn't fit correctly and I put my 2 inch shackle back in and send the other ones back.

Damn it!!! I got a little to excited to quickly!!!! Just found out the chevy leafs are 3 inch wide. Mine is 2.5. Oh well, at least I didnt buy them