Tailgate Ford Emblem
#11
Member
Thread Starter
Join Date: Nov 2011
Location: Las Cruces, New Mexico
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
well i did some of it with fishing wire and then i took ATLONGs advice and pried on it some with a flathead and a rolled up towel. It worked pretty well just make sure you get behind the black plastic of the emblem not just the outer metal part this will bend it all to hell. It helps if you do it on a warm day also
#12
Junior Member
Originally Posted by Lucky575
Is the Ford emblem on the tail gate taped on or is it like the grill emblem and has some cheep bolts holding it on??? Ive looked pretty rigorously but havent found much. Im going to remove it to paint and match my front emblem i just did.
#14
Junior Member
Originally Posted by Lucky575
just regular ol flat black. still not sure if i should clear coat it or not. any opinions?
#17
I got a question thats not related, hopefully you guys can answer. Does the part below my side emblem come stock or was it added? If it was added should it just be double sided tape or would it have clips? I know the emblem itself has clips but i doubt if something was added it would, just making sure bc the vents need to go!!!
#18
I got a question thats not related, hopefully you guys can answer. Does the part below my side emblem come stock or was it added? If it was added should it just be double sided tape or would it have clips? I know the emblem itself has clips but i doubt if something was added it would, just making sure bc the vents need to go!!!
I looks like it was added. They do come similar to that on the 250's and 350's
#19
Iowa Farmer
I got a question thats not related, hopefully you guys can answer. Does the part below my side emblem come stock or was it added? If it was added should it just be double sided tape or would it have clips? I know the emblem itself has clips but i doubt if something was added it would, just making sure bc the vents need to go!!!