DrewB01

Ok this issue has probably been past around alot, but is there any supercharger for the 4.6 08 motor! I am being told that 5.4 motor superchargers will fit but minor head work will need to be done

VanoFord

You can actually buy a supercharger kit for a 4.6L mustang (2v of course) and it will bolt right up. The only difference in that kit compared to our trucks is the angle the intake goes into the manifold... it collects from the front passenger side where as ours is driver. All you need is to custom fab that tube (very easy) and you are good to go.

DrewB01

ok good deal, appreciate the help! People kept saying that the mustang chargers wont fit, im assuming there talking about the pound of boost being ran, i know if i run more than 12 than im looking at the risk of blowing the heads!

rick99601

it has been said many times before, but, its all in the tune.

tork tech
http://shop.torktech.com/index.aspx

esp660

all the superchargers i have seen have a throttle body on the bottom ....would you have to take the original throttle body and plenum off?