Steering rack
 

Anyone had their steering rack and pinion go bad? Mine seems to make a popping sound, alignment shop said it's bad. How many hours to change?

I had to change mine since the pump pressure line feeding into it was corroded away further up but the male end was stuck in the rack, relatively easy and did in my driveway on jack stands. I'd say 2 hours for the rack itself but you'll must likely need to change out the lines as well which will be 2 more hours if that. Don't mess up like I did and clamp that steering wheel down to make the eventual alignment that you'll need easier. Below is a step by step video from Snow Plow Life that I followed which helped immensely. Used a detriot axle rack with the lifetime warranty and its been working well thus far.

Cool, thanks. Luckily no corrosion anywhere. From Jersey but reside in Texas. Thank you.

before you change the rack check the steering shaft. the u joints on them go bad and can cause a popping sound.i replaced my rack and steering pump to find out it was the steering shaft.

i had to replace the steering shaft on mine about a year ago. it didn't make any popping noises it was just difficult to turn

Steering shaft fine. Guess I'll order the rack. Thanks all.

I ordered the rack from Detroit Axle and it arrived today, Reman confirmed by customer service, here in USA. Will install today.