Seat Belt Alert Issue
#1
Seat Belt Alert Issue
For some reason my seat belt alert goes off even if it's plugged in. I've tried disabling the alert by following the plug in/unplug method that i've found in the threads of this site and also included in the owners manual. This didn't disable it.
I've noticed that if i plug the seat belt in before i start the truck then it doesn't beep, however if i start the engine then plug in the seat belt, the alert will occur. Has anyone else had this issue or know of a solution?
I've noticed that if i plug the seat belt in before i start the truck then it doesn't beep, however if i start the engine then plug in the seat belt, the alert will occur. Has anyone else had this issue or know of a solution?
#2
Senior Member
Hmm might be a longshot but when my front airbag sensor went (in front of the radiator), I had very similar. I also had the airbag light on though if I recall until I replaced it of course. I just found it strange that the one sensor kept making my seatbelt chime go off.
#3
Moderator
Listen to the chime. It should come in sets and they number and frequency of the chime will give us an idea what's wrong. A lot of times it's an air bag or seat position sensor.
#4
it chimes 25 times very quickly, I'd say within 10 seconds, every 30 seconds or so. I believe it did this 10 times and then it stops.
#5
Moderator
Could it be 5 sets of 5 chimes? If so that would be this... https://ca.answers.yahoo.com/questio...6183736AAIShA6
Basically there is an airbag problem. If you search airbag chimes in the 04-08 forum and you'll find some things to try first.
Basically there is an airbag problem. If you search airbag chimes in the 04-08 forum and you'll find some things to try first.