Saleen grille installed!
#24
#25
Not to hijack this thread (most current Saleen grille thread) but all 6 of my 10mm bolts at the top just keep spinning. Any suggestions on how to remove them? One side is definitely broken and my surround will pull away from the h-bar grille but I just don't know how to remove those 10mm bolts.
Gotta love all the Cleveland Ohio rust
Gotta love all the Cleveland Ohio rust
#27
It looks like the back is a square head but the ends of the screws are so rusted, can't get the nut off the end. Had soaked them in PB Blaster for about a week, tried vice grip and small wrench...tomorrow I'm going to use a dremel and just cut the bolts I think... My plastic surround is already cracked and chipped from me prying on it. Fail
#28
Eat. Sleep. Lift.
Originally Posted by seano04
It looks like the back is a square head but the ends of the screws are so rusted, can't get the bolt through. Had soaked them in PB Blaster for about a week, tried vice grip and small wrench...tomorrow I'm going to use a dremel and just cut the bolts I think... My plastic surround is already cracked and chipped from me prying on it. Fail
#29
#30
Eat. Sleep. Lift.
Originally Posted by seano04
Luckily, I do own a hydro dipping company so reprinting it, wouldn't be an issue.