rpm shift ranges on an 5.4 3 valve
#1
rpm shift ranges on an 5.4 3 valve
I have an 06 f150 5.4 3 valve with an edge evolution programmer hooked up. My question is when on the extreme setting that comes programed from edge the rpm shift ranges suck lol. I want to create a custom tune for it so it will shift better . The programmer let's you adjust each gears shift rpm range and it's WOT (Wide open throttle) shift rpm range I'm trying to figure out what I should set the ranges at for regular shift and WOT shift for each gear... where can I go to find that kind of information or am I better off sending my programmer to gryphon tunes?
Here what I have done to my motor
K&n cold air intake
Accel coil packs
Edge programmer
Pacesetter long tube headers
Any advice would be appreciated
Here what I have done to my motor
K&n cold air intake
Accel coil packs
Edge programmer
Pacesetter long tube headers
Any advice would be appreciated
#2
TOTM November 2019
iTrader: (2)
I would convert it to a Gryphon via your home computer through PHP. Its easy and free (I did and I love it). I run level 2 with the following custom settings:
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had one on every Ford truck I have owned since 2001. BTW, nice looking truck!
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had one on every Ford truck I have owned since 2001. BTW, nice looking truck!
Last edited by Summers22; 01-09-2016 at 10:05 AM. Reason: spelling
#3
Senior Member
I have an 06 f150 5.4 3 valve with an edge evolution programmer hooked up. My question is when on the extreme setting that comes programed from edge the rpm shift ranges suck lol. I want to create a custom tune for it so it will shift better . The programmer let's you adjust each gears shift rpm range and it's WOT (Wide open throttle) shift rpm range I'm trying to figure out what I should set the ranges at for regular shift and WOT shift for each gear... where can I go to find that kind of information or am I better off sending my programmer to gryphon tunes?
Here what I have done to my motor
K&n cold air intake
Accel coil packs
Edge programmer
Pacesetter long tube headers
Any advice would be appreciated
Here what I have done to my motor
K&n cold air intake
Accel coil packs
Edge programmer
Pacesetter long tube headers
Any advice would be appreciated
#4
Lol I put the first set on and they were junk lol FYI don't buy edelbrock shorty headers they are junk.... a buddy did these for me just because I didn't have time to do it with my work schedule... pacesetter sound awesome I still have flowmaster mufflers on it and still sounds great...
#5
I would convert it to a Gryphon via your home computer through PHP. Its easy and free (I did and I love it). I run level 2 with the following custom settings:
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had on on every Ford truck I have owned since 2001. BTW, nice looking truck!
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had on on every Ford truck I have owned since 2001. BTW, nice looking truck!
#6
I would convert it to a Gryphon via your home computer through PHP. Its easy and free (I did and I love it). I run level 2 with the following custom settings:
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had one on every Ford truck I have owned since 2001. BTW, nice looking truck!
WOT shifts: 1-2 @ 5000 rpm, 2-3 @ 5000 rpm and 3-4 @ 4700 rpm
WOF: +1.75
Timing: +1 degree (ONLY IF YOU WILL BE RUNNING 91 OCTANE) otherwise leave it alone.
Max Rev: 5500 rpm
Shift firmness set to +4 on all 3 settings
Top speed 125 mph
The rest of the settings set to your correct tire size & gears. These settings really woke my truck up. I am not new to having an Edge Evolution, I have had one on every Ford truck I have owned since 2001. BTW, nice looking truck!
Trending Topics
#8
I have a edge evolution cs2 can it be converted to gryphon or just the (1st generation evolutions) for lack of better terminology. Would it even make a difference? 2004 f150 with a CAI and flow master exuast