GrnMachine210

Im getting ready to replace my rear shocks. Im not sure if the shocks are different between 4x4 and 2wd but i have a 2wd with the OEM rear block from a 4x4. My question is whether or not i should get shocks that fit a 4x4 or 2wd.

Golferguy667

you could always get the bilstein leveling ones, that way you can crank em 2" up in the front and level your truck out.

techrep

iTrader: (1)

yep...go with the 5100's

GrnMachine210

Already have blocks up front. Now I have a little rake. A 3in block would level it out but I hears it bad for the front end components so I might just go with 2.5in block instead

techrep

iTrader: (1)

just buy 4 5100's and be done with the block's

alsatropine

iTrader: (2)

I tried to purchase the 5100s for my rear and had to go with a regular bilstein because they didnt offer the 5100s for the rear. Just the front. I would go with bilstein brand. I have them on the rear and a 2.5 in level in the front. They work wonderfully.

techrep

iTrader: (1)

they are both 5100 series shocks...just state front or rear...fronts are adjustable from 0-2.5 inches and the read are not adjustable.

alsatropine

iTrader: (2)

Sorry Techrep.. Thats what I meant. LOL. Im stupid today..Too many phones ringing and tones going out to keep a straight thought.