Remote start Question
#1
Remote start Question
Well actually it is for the keyless entry, I have it all installed and working except for the keyless entry on the Viper system do I need relays and if so does anyone have a diagram on how they are to be wired I have tried wiring them up to the wires in the kick panel directly from the RS box and I have tried wiring them through a relay as a positive pulse system are these reverse polarity lock systems?
#3
Senior Member
#7
old member new account
Lock Motor pink/black 5wi DKP or BCM, blue plug, pin 2
Unlock Motor red/orange 5wi DKP or BCM, blue plug, pin 5
if there is no key less entry you need to add relays and it will be a 5 wire system,
if the vehicle comes with key less entry you can connect to the BCM no relays
The BCM (body control module) is located on the drivers side rear cab wall.
in case someone needs this info in the future
Unlock Motor red/orange 5wi DKP or BCM, blue plug, pin 5
if there is no key less entry you need to add relays and it will be a 5 wire system,
if the vehicle comes with key less entry you can connect to the BCM no relays
The BCM (body control module) is located on the drivers side rear cab wall.
in case someone needs this info in the future
Last edited by supra; 09-25-2013 at 11:31 PM.