Ghostrider7272

my last one I had was same one I just got and it had been on there for 3 years and when I get rid of it they were still all working

Especial86

iTrader: (1)

That's a great deal! Did you hardwire it or use the 4 pin connector? Did you have to splice into the reverse lights to get it to kick on in reverse?
Got any pics??

Blueleader

The reverse lights should be wired into the harness plug because a lot of trailers, campers, etc. have reverse lights.

SultanGris

The 4 pin doesn't have reverse lights, you need to wire it in.

Especial86

iTrader: (1)

Ahh, ok... That's what I was wondering...

I think I might scoop up that LED glow light bar... It should help when I'm using my reverse camera in very dark parking situations with no street lights.. My reverse lights suck with the blacked out taillights..

It should be easy to splice considering I already have an easily accessible spliced wire running off the black/pink reverse wire that triggers my camera when reverse is selected..

So I'm assuming there is an extra wire hanging off these LED's that gets connected to the reverse wire?

SultanGris

If you buy one with reverse lights there is, like on the recon extreme scanning one I have.

mattark17

I had this for about a year and half. Worked great. Never got around to splice the reverse lights. All LEDs worked till I got rear ended and wrecked the plug. Still on the truck just going to direct splice the wires.

08screwCA

http://www.gorecon.com/products.php?...ate-Light-Bars I've had this for a year with no issues it puts any other light bar to shame. Used my 4 pin for the brake/running/signal functions and hardwired the reverse and 12v switch into my 7 pin harness. You will want a 60". Anything smaller wont look right

SultanGris

This, I agree, 60 or it will look funny.

Kokeshx4

Will 60 fit my flareside??