Realtree II build.
#11
Senior Member
Thread Starter
The holes were just behind the edge of the chrome bumper I had two drill through the two metal plates about 3-4 inches behind the bumper personally taking the bumper off would have made this project way easier. If I had a 30 inch light bar the mounting would've taken 15 min. The kit came with two 1 inch bolts I had to go to the hardware store and get two 2 inch bolts because of the plates and the gap between them and the ridge I had to drill into on both sides. Shown in the upside down picture is the plastic piece I had to remove to get the light to fit
#12
Senior Member
Thread Starter
I got the chance to take some better led bar photos and I got to wash and shine my truck up so here's some better picture for you guys I'll have to post one at a time I guess. Crap
#20
Senior Member
Thread Starter