Reading misfire with tourque app
12-24-2016, 10:39 AM
#1
Member
Thread Starter
Reading misfire with tourque app
I am having problems trying to read misfires on individual cylinders. I can read the overall misfires however. Anyone have any ideas. Maybe it's my bluetooth adapter.
12-28-2016, 12:42 AM
#2
Secondly, when adding new gauges I believe active ones are shown in green, are they showing as active/supported when you go to add them?
12-28-2016, 09:08 AM
#3
Member
Thread Starter
Do you have the Ford PIDs installed? I can't remember if you need the ford specific one, not the general one provided on the app for the misfire readout.
Secondly, when adding new gauges I believe active ones are shown in green, are they showing as active/supported when you go to add them?
Secondly, when adding new gauges I believe active ones are shown in green, are they showing as active/supported when you go to add them?
12-28-2016, 09:47 AM
#4
Moderator
If I remember correctly the individual MF count does not work. Total and also if you run one of the logs you can find out more detailed such as which cylinder and how often.
12-28-2016, 12:16 PM
#5
Member
Thread Starter