Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   2004 - 2008 Ford F150 (https://www.f150forum.com/f4/)
-   -   rattle from beneath!! (https://www.f150forum.com/f4/rattle-beneath-69239/)

dgiancola 11-02-2010 03:38 PM

rattle from beneath!!
 
ok so i need some suggestions here! ive got the rattleing sound that starts when engine is warm and starts at 1200prm and dies off at about 1700rpm...its not the cam phasers bc i have that and know that sound:mad:...this noise is coming from right under the cab...does it in park and when moving...sounds like a heat shield or something but i have been under the truck and bent around the shields that were close to other parts...still rattles!

its hard to explain but just sounds like a metal rattle...i have aftermarket duals with no mufflers but still have stock cats...the exhaust is all solid as a rock! any suggestions would help! thanks in advance guys and gals!!!

Lenn 11-02-2010 04:11 PM

Check the lifting points on the engine up on top. My buddy has a 4.2L and his were rattling whenever he was at about that rpm range. It took us forever to locate.

aidswolf 11-02-2010 04:57 PM

i think i have the same problem, but i think its cats.. i have custom exhaust too but stock cats

dgiancola 11-02-2010 08:41 PM

i had the same rattling lift points on my 07 v6 too....ill have to check into that....

aidswold-can the cats cause this? maybe something inside the cat?

aidswolf 11-03-2010 02:58 AM

well if one of your cats is done. it will rattle when you rev it.. just get someone to rev it. while u are under listening

dgiancola 11-03-2010 03:29 AM

yea havent had anyone to help me out with that yet...tried reaching in to push pedal while beside truck but didnt work out to well!!

Mod (Ret.) 11-03-2010 08:22 AM

Could be a loose baffle in the muffler as well. Try rapping with the wood end of a hammer on the outside of your muffler to see if that's where it's comming from.

Franchi 11-03-2010 08:46 AM

/\/\

That's what happened to my original exhaust. Had a Flowmaster 50 series muffler on and rattled but only under certain times. Finally figured out a weld on a baffle inside the muffler was broken.

A rubber mallet would work too, just nothing metallic.

dgiancola 11-03-2010 03:11 PM

no mufflers on the trucks...4 cats and straight back from there....anything else?


All times are GMT -4. The time now is 11:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands