JRyellowFX4

okay i have a 3 inch leveling kit with rear blocks and i want to know if 18 inch xd monsters with 35 inch nitto trail grapplers will fit on my truck? its an 04 fx4. thanks for input in advance.

ford4wd08

backspacing and all that good jazz is needed to see if they will fit. tire size (width is helpful too)

JRyellowFX4

lol ya was hoping someone had the same set up i was going for or something i dunno the back spacing or anything

ford4wd08

well find it out... dont make the mistake and just order them or theyll rub like a ****

JRyellowFX4

all it says is offset is 35. and they are 18x9 6x135

ford4wd08

well offset is the equivalent of backspacing. and what is the tire size?

JRyellowFX4

not to sure here is the page for them but i am gonna get them with 35s if it will work out. check it out all dimensions are on that page.

http://cgi.ebay.ca/18-XD-778-MONSTER...item1c14180285

ford4wd08

well youve got me stumped a little, maybe someone with more wheel knowledge can help you out....

JRyellowFX4

lol ok man thx for ur help anyways

08Screw

Hey man I have this setup check in my signature and you can see what I went with. The rims are +18mm offset and the tires are 295/70R18 which equates to almost 35" tires so I guess this is what you are talking about. I have a 2" leveling kit and with some minor trimming they fit like a charm. I have zero rubbing and I like how far they stick out. Hope this helps. Here is post I made which shows what I trimmed and how far they stick out.

https://www.f150forum.com/f4/got-some-new-shoes-56560/

It looks like in the ebay post you can choose between a -12mm offset or a +18mm offset. If you with the -12mm it is definatley going to rub IMO due to the sidewall of the Trail Grappler.