Please Help!
2007 King Ranch, 5.4l, 152,000 miles. Changed plugs, boots, and springs last weekend. Truck has been running fine all week. I was on the way to the mountains tonight to take my son hunting for the week when all the dash lights came on and everything died. The truck will crank, but will not start. I hooked up a code reader and got the following codes: P0305, p0351, p0352, p0353, p0354, p0355, p0356, p0357, p0368, p0962. Any ideas? TIA
|
Originally Posted by Newbomb Turk
(Post 5985736)
2007 King Ranch, 5.4l, 152,000 miles. Changed plugs, boots, and springs last weekend. Truck has been running fine all week. I was on the way to the mountains tonight to take my son hunting for the week when all the dash lights came on and everything died. The truck will crank, but will not start. I hooked up a code reader and got the following codes: P0305, p0351, p0352, p0353, p0354, p0355, p0356, p0357, p0368, p0962. Any ideas? TIA
|
Post the brand of the new parts you put in and why you changed them. Look through this site to find your codes. Never title a thread "Help!".
https://www.obd-codes.com/trouble_codes/ |
Originally Posted by BareBonesXL
(Post 5985771)
Post the brand of the new parts you put in and why you changed them. Look through this site to find your codes. Never title a thread "Help!".
https://www.obd-codes.com/trouble_codes/ |
Originally Posted by Newbomb Turk
(Post 5985784)
Sorry about the help title...I used motorcraft plugs and AC Delco boots and springs (because the motorcraft boots didn’t come with springs). I changed them because I was getting a shudder sometimes when I got back onto the gas after coasting. I looked up the codes and thought it was odd that I would get the ignition code malfunction code for every cylinder. |
Originally Posted by Newbomb Turk
(Post 5985736)
when all the dash lights came on and everything died. The truck will crank, but will not start. I hooked up a code reader and got the following codes: P0305, p0351, p0352, p0353, p0354, p0355, p0356, p0357, p0368, p0962.
Anyway, here's what I had written - I was kind of joking, because when I see "help" in a title it makes me cringe/pucker/feel it in my gut. Apparently Ford's engineers cut their calculations close on the fuses (fuse 27), and yours are 11 years old. So Scorge's is the easy quick start. Fuses and power, or lack of, go together. I had a simple computer connector lose a single pin connection, just from being old. I fixed it by accident just by disconnecting it and reconnecting it. So, pulling and resetting your fuses wouldn't hurt either if you don't find a blown one. You could use a meter also, very quick. Might be that that the shudder was the start of the real problem and that your tuneup work has nothing to do with it. Or that the shudder and the tuneup both have nothing to do with it. Good luck. |
Scourge was right....fuse #33. Put in a new fuse and it fired right up! Thanks for all your help! |
Originally Posted by Newbomb Turk
(Post 5986100)
Scourge was right....fuse #33. Put in a new fuse and it fired right up! Thanks for all your help! |
Double check everything that fuse is relating to...
Want to make sure that there was nothing that caused it to blow Check for a cracked/damage ignition coil, etc. |
Drove three hours to the mountains...no further issues. Thanks!! |
All times are GMT -4. The time now is 06:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands