Pics of 2wd w/ Body Lift
03-10-2010, 12:56 PM
#11
Locker>Limited Slip
Everything was done 100% wrong. 3" Spacer is just kind of bad, but her ball joints are getting rapped. You can hear the A-Arm hitting the coil even over the smallest bumps. Its basically resting on the strut. Next the A-A-Ls are done wrong she has 2 of them, one on top one on bottom. Ford designed the two pin system so the leaves didn't get out of line. Wee there are one pin leaves attached to a 2 pin leave system. The truck rides horrable. If she would of brought it to me, I would have done it cheaper and better not all this crap.
03-10-2010, 05:08 PM
#12
Go Noles >>---;--->
Thread Starter
Join Date: Dec 2009
Location: Alabama
Posts: 2,189
Likes: 0
Received 0 Likes
on
0 Posts
Everything was done 100% wrong. 3" Spacer is just kind of bad, but her ball joints are getting rapped. You can hear the A-Arm hitting the coil even over the smallest bumps. Its basically resting on the strut. Next the A-A-Ls are done wrong she has 2 of them, one on top one on bottom. Ford designed the two pin system so the leaves didn't get out of line. Wee there are one pin leaves attached to a 2 pin leave system. The truck rides horrable. If she would of brought it to me, I would have done it cheaper and better not all this crap.
03-10-2010, 05:18 PM
#13
Locker>Limited Slip
She did, please do it right though. They never re-hanged her bumper and there is just a lot of bad things about it. If you do the kit right (just follow directions) it will look great! Simple as that!
