Passenger Power Windows Not Working
 

All of a sudden, my passenger window will not go up (power windows) with the driver side door switch or the passenger side door switch. Is it the actuator? A fuse? A relay?

Do you have a rear switch? if so, pop it out and plug it into the non-working window and see if that will work. If not, it could be a pinched wire.

To add to my original post, aso well as a response to yours, I went out to work on it, at night, had the headelights on, in which the interior switch lights in the buttons come on with, and all the little "arrow" lights were on in all the switches, EXCEPT the passenger side window button. Which obviously tells me that there is no power to that switch.

Any troubleshooting ideas or hints, tips or tricks? Thanks in advance.

Check the wire loom between the drivers door and the cab for an open wire.

Okay well I got into it a little today, and the window was all the way down. So when I pushed the down button, it made the sound that it makes when you try to roll a window down thats already all the way down, kind of a slight "knock", if you will. But when I push the Up button, nothing. At all. So, I got the bright idea to switch the wires (down with up, up with down), and just as I suspected, and hoped, when I pushed the down button, the window went up. But wouldn't go down, hence everything now being flip flopped, because of the switched wires. So the motor works up and down. It's just not being sent a signal from the switch? Meaning the switch is bad? I took the switch from the passenger side back door and plugged it into the front, and still nothing. No up. No down......ideas?

You have a broken wire somewhere