View Poll Results: What oil pump are you running?
OEM - Never replaced
15
65.22%
OEM - Replacement
0
0%
Melling M360
5
21.74%
Melling 10340
2
8.70%
Ford Racing High Volume
1
4.35%
Voters: 23. You may not vote on this poll
Which Oil Pump are you Running?
#1
Moderator
Thread Starter
Which Oil Pump are you Running?
Similar to a few of the other polls in here Im curious. Im putting up 4 of the most common choices and will add more if needed. Lets see what oil pump you're running and throw in a comment of your HOT idle oil pressure if you can or want to!
Thanks!!!!
Thanks!!!!
#2
Question - can you add one more OEM option, to make "OEM - Never replaced" and "OEM replacement"?
#3
Moderator
Thread Starter
That's a great idea! Now to figure out how to edit the poll???
#4
There's an "Edit Poll" button on the top right, unless you don't have that... or I can do it, whichever
#5
Moderator
Thread Starter
I don't have it. Go ahead and put it in there please.
#6
Done. The two people voted for OEM already, specify which one you wanted and I'll add you to that particular selection
The following users liked this post:
BadFish523 (02-07-2017)
#7
Moderator
Thread Starter
Trending Topics
#8
Senior Member
OEM - never replaced. 32psi hot idle on timing components 4 years old with about 40k.
Spent some time on the phone with federal mogul about a high volume pump years back. If there's "truly" one out there, they don't make it.
Spent some time on the phone with federal mogul about a high volume pump years back. If there's "truly" one out there, they don't make it.
The following users liked this post:
BadFish523 (02-07-2017)
#9
Also OEM, never replaced. I have a replacement, but never put it in when I did the timing equipment. I just didn't feel like doing it after doing everything else, and the factory one was already working fine. Now, I wish I had, just because I was already in there, but at the time, I didn't want to have yet another thing to do. I just wanted it done so I could have my truck back.
#10
OEM 194k miles.
Runs fine...don't have pressure readings though
Runs fine...don't have pressure readings though