Oil pressure
#2
Mark
iTrader: (1)
Perfect.. 28.5 psi
#3
Moderator (Ret.)
And if its stock, it will never differentiate. The stock oil pressure gauge shows center (pressure) or nothing (no pressure, or bad sensor/gauge). So useless that I removed the silly dash coin holder (for 4x4 models, the switch is there) and installed a true oil pressure gauge in its place along with sender and an engine oil cooler.
#4
Senior Member
And if its stock, it will never differentiate. The stock oil pressure gauge shows center (pressure) or nothing (no pressure, or bad sensor/gauge). So useless that I removed the silly dash coin holder (for 4x4 models, the switch is there) and installed a true oil pressure gauge in its place along with sender and an engine oil cooler.
On my 04 it shows a tad over half way. When I changed the oil at first start up it was low then went right passed the half way mark to where its been since.
#6
Senior Member
Most in this generation sit just over the halfway mark like that. Don't trust that gauge for much though. It's just a dummy gauge.
#7
Senior Member
So annoying that it isn't a real gauge. I take it the start up rattle after an oil change is normal since there's no oil in the tensioner upon changing the oil? Sound went away after 3-5 seconds and I never heard it again 5 months later.
Trending Topics
#10
Mark
iTrader: (1)
At least it shows you when there is a need for action...