My 2006, 4.6l wont crank and no start. I have power to pumps, and starter, which will jump and crank, but with key in run, wont start. There is no power to the solenoid with the key turned to start position. I've swapped Pcm relays with no change, it still clicks as normal.

I can't see why this is occurring, and I dont have a diagram to tell where the wires are running or what else might be in the circuit between the circuit breaker and solenoid.

has anyone seen this issue, and have a potential solution?

anyone have a ignition/start wiring diagram they can share?
thanks!
Chris

 

here is one. there are several more just look up ignition start wiring diagram on internet

 

Thanks Darrin,
But I need one specific to the 2006 F 150. I've gone through all the easy bits, this problem appears to be off the beaten path.

I went ahead and bought a manual at the parts store, but it is quite thin as well. If anyone has a FSM for this truck, I'd sure love to get ahold of some select scans of the ignition/start wiring diagram.

thanks again
Chris