New Design 04-08 F150 LED DRL LIGHTS
Thinking about getting these for my 07 Lariat ... Would you ? .... THOUGHTS ?
https://cimg5.ibsrv.net/gimg/www.f15...471660472d.jpg https://cimg8.ibsrv.net/gimg/www.f15...58f4b3f3c2.jpg |
Those are dirty. I actually thought about making my own.
Shut up and take my money, as long as the set is less than 250. Post a link! |
Originally Posted by dyeguy1212
(Post 4379393)
Those are dirty. I actually thought about making my own.
Shut up and take my money, as long as the set is less than 250. Post a link! |
They are all over ebay. Problem is they will leak, the lens coating will peel and the drl will burn out quickly. They run about $125. Cheaper to open your stockers and add a quality tube light.
|
I'd open my stockers, place my own LEDs, and retrofit at the same time.
It's what I did with mine.
Originally Posted by ak_cowboy
(Post 384229)
Test fitting projector and shrouds. Minor trimming needed to be done on the MC-Rs. May vary by which shroud you choose.
http://i1115.photobucket.com/albums/...-28-49_922.jpg Ballast mount location http://i1115.photobucket.com/albums/...-01-29_947.jpg http://i1115.photobucket.com/albums/...-01-37_930.jpg Mess of wiring behind each headlight now. http://i1115.photobucket.com/albums/...-53-49_820.jpg http://i1115.photobucket.com/albums/...-54-50_261.jpg Testing halos http://i1115.photobucket.com/albums/...-20-51_487.jpg Testing Turn Signals OFF http://i1115.photobucket.com/albums/...-55-16_375.jpg ON http://i1115.photobucket.com/albums/...-55-01_530.jpg Final pics! http://i1115.photobucket.com/albums/...-24-31_242.jpg High Beams http://i1115.photobucket.com/albums/...-25-37_256.jpg |
^^^He has it right.
|
Somebody buy a set and report back in 2 months:
http://www.ebay.com/itm/NEW-DESIGN-B...hVOTid&vxp=mtr http://www.ebay.com/itm/Drl-Led-Tube...FVOWw~&vxp=mtr |
Originally Posted by Summers22
(Post 4379800)
Somebody buy a set and report back in 2 months:
http://www.ebay.com/itm/NEW-DESIGN-B...hVOTid&vxp=mtr http://www.ebay.com/itm/Drl-Led-Tube...FVOWw~&vxp=mtr My only think is I'm not sure is I want that LED running upon ignition or have it on a switch or what. I would also seal with silicone type sealant before install. The Lights on my 7.3 were from the same seller and a year later they were good as new! |
Not mine...I have sealed them with black RTV and they finally stopped fogging. The lens coating is peeling/chipping off but its mostly gone. I keep polish on them and you can hardly tell where there are issues. Oh well, they are still better than my crackling stockers.
|
So where can I get a good fitting LED strip then?
|
All times are GMT -4. The time now is 05:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands