Message Center
#4
Senior Member
INSTRUMENT CLUSTER
Removal and Installation
1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the module configuration information to the diagnostic tool. Depower the supplemental restraint system (SRS).
2. Remove the instrument cluster center finish panel.
3. Lower the tilt steering column to the lowest position.
4. If equipped, disconnect the transmission range indicator.
o Push in the clips and disconnect the transmission range indicator.
5. Remove the 4 screws and the instrument cluster.
o Disconnect the 2 electrical connectors.
6. To install, reverse the removal procedure.
o Download the instrument cluster configuration information from the diagnostic tool into the new instrument cluster.
Removal and Installation
1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the module configuration information to the diagnostic tool. Depower the supplemental restraint system (SRS).
2. Remove the instrument cluster center finish panel.
3. Lower the tilt steering column to the lowest position.
4. If equipped, disconnect the transmission range indicator.
o Push in the clips and disconnect the transmission range indicator.
5. Remove the 4 screws and the instrument cluster.
o Disconnect the 2 electrical connectors.
6. To install, reverse the removal procedure.
o Download the instrument cluster configuration information from the diagnostic tool into the new instrument cluster.
#5
Junior Member
Thread Starter
[QUOTE=GATORB8;447857]INSTRUMENT CLUSTER
Removal and Installation
1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the module configuration information to the diagnostic tool.
"Diagnostic tool" sounds like $$$$$$$ How can I obtain one?
Removal and Installation
1. NOTE: Prior to removal of the instrument cluster, it is necessary to upload the module configuration information to the diagnostic tool.
"Diagnostic tool" sounds like $$$$$$$ How can I obtain one?